
Specifications |
TL Micro 150 |
TL Micro 200 |
TL Micro 300 |
Tool diameter Central measurement Tangential measurement from above Tangential measurement from the side |
0.03 mm to 30 mm 0.03 mm to 30 mm 0.03 mm to 30 mm |
0.1 mm to 80 mm 0.1 mm to 98 mm 0.1 mm to 122 mm |
0.1 mm to 180 mm 0.1 mm to 324 mm 0.1 mm to 428 mm |
Repeatability |
± 0.2 µm |
± 1 µm |
|
Spindle speed* |
For individual tooth measurement, optimized to standard spindles or HSC spindles (> 30 000 rpm) |
||
Laser |
Visible red-light laser with beam focused at center of system |
||
Wavelength/Power |
630 nm bis 700 nm/< 1 mW |
||
Protection class IEC 825 |
2 |
||
Input signals |
Square-wave signals 24 V DC
|
||
Output signals |
Square-wave signals 24 V DC
|
||
Voltage supply |
24 V DC / 160 mA |
||
Electrical connection* |
M23 flange socket (male), 12-pin, either on the side or bottom |
||
Mounting |
Within the machine work envelope |
||
Protection EN 60 529 |
IP68 (when connected, with sealing air) |
||
Tool cleaning |
Blower |
||
Operating temperature Storage temperature |
10 °C to 40 °C 0 °C to 50 °C |
||
Mass |
Including blower |
||
Cable outlet lateral |
Approx. 0.85 kg |
Approx. 0.95 kg |
Approx. 1.15 kg |
Cable outlet downward |
Approx. 0.90 kg |
Approx. 1.00 kg |
Approx. 1.20 kg |
* Please select when ordering |